Model 5037T 22.8' - 36.8', 2-Piece Boom Standard Specifications

• Boom: The 22.8' to 36.8', two section boom features full hydraulic extension and retraction. Its welded steel box construction has replaceable wear pads and bushings. A 10.5" bore vertical luff cylinder increases load space and capacity at low boom angles. Maximum tip height is 47'. Elevation 0 to 78 degrees.
  
  
• Boom Tip: Four sheaves with roller bearings, cable stays, and pad eye for wedge socket provide the ability to reeve from 1 to 6 parts of line without requiring attachment of snatch blocks. The use of non-metallic sheaves reduces boom weight and increases cable life.
  
  
• Rotation: A 47" diameter swing bearing is driven by a planetary gearbox with integral brake. The standard hydraulic and electric rotary swivels provide 360 degree continuous rotation. All components are accessible from the top of the deck for ease of maintenance.
  
  
• Controls: Outrigger controls are operated from the ground at the rear. Boom controls are at the operators platform. All controls are fully proportional. Standard equipment includes a radio anti-two block alarm and function shutdowns.
  
  
• Operators Platform: The open, ride-around platform includes a control console, horn, adjustable seat, and foot throttle.
  
  
• Hydraulic System: The crane can be powered by an optional wet line kit mounted on the tractor, or an optional diesel power pack mounted on the trailer, making it self contained.
  
  
• Outriggers: Computer optimized outrigger system features 18' spread, out and down type front and rear outriggers for maximum stability over side and rear with minimum weight. Individual controls for each function allow ease of set upon uneven terrain. Firm footing is achieved by means of 24" diameter removable aluminum pads on the rear and with fixed pads on the front outriggers.
  
  
• Torsion Box Trailer: The trailer is designed and built specifically for the crane. The 22" deep x 35" wide torsion box is all 100,000 PSI yield steel. Specifications:
  Length = 41'6"
  King Pin = 24"
  Deck Height = 55"
  Axle Rating = 25,000 Each
  Air-ride Suspension Rating = 25,000 Each
  Tires = 11:00 x 22.5
  
  
• Body: Steel cross members, 6" deep, spaced at 24", with 8" steel side channels. Deck consists of 1" hardwood, providing a sturdy platform. All components are pre-painted in customer's choice of colors with epoxy primer and polyurethane topcoat prior to assembly to ensure maximum protection.
  
  
• Load Chart: Each crane is load and stability tested before completion. This results in an individual load chart for each crane without requiring a minimum chassis weight or the installation of ballast.
  
  
• Winch and Reeving: Standard winch has variable speeds, power up and power down, planetary drive with spring applied, hydraulically-released brake.
  Maximum base layer line pull: 12,000 lbs.
  Maximum top layer : 122 ft./min
  Reeving: Five parts of line
  Rope: 385' - 1/2" diameter, 6x25 FW, IWRC, EEIPS
  Load Block: 20-ton, double sheave, roller bearings with swivel hook and safety latch
  A 50,000 lift package is available as an option.
  
  
• One operation and maintenance manual.

  Options
  

Axle Weights (LB.) for Maximum Payload
(Fifth wheel shifted forward to load front tractor axle)

	Tractor	Trailer	Payload**	Total
Front Axle	10,025	409	1,566	12,000
Rear Axle	8,679	4,417	16,904	30,000
Trailer Axle	-	23,156	14,844	38,000
Total	18,704	27,982	33,314	80,000

**Based on distance of payload C.G. to centerline of crane rotation of 259.2"

Load Chart for 5037T

Radius in Feet	Over Rear			Over Side			Over Front
	23' Boom	30' Boom	37' Boom	23' Boom	30' Boom	37' Boom	23' Boom	30' Boom	37' Boom
8	58,280*			58,280*			58,280*
10	49,690*	46,770*		49,690*	46,770*		49,690*	46,770*
12	43,680*	41,010*	39,130	43,680*	41,010*	39,130	43,680*	41,010*	39,130
15	37,430	34,770	32,950	37,430	34,770	32,950	37,430	34,770	32,950
18	32,610	30,400	28,680	29,370S	29,560	28,680	32,610	30,400	28,680
20	26,410C	26,630C	26,480	23,530S	23,740S	23,840	29,610	28,110	26,480
22	21,650C			19,430S			22,050
25		17,260C	17,360C		15,610S	15,710		23,430	22,340
29		13,200C			11,980S			16,390
30			12,610C			11,480S			19,210
35			9,720C			8,870S			15,580
36			9,240C			8,430S			12,890

*Maximum load with standard reeving is 40,000 LB.
Numbers shown in bold type (above tipping line) indicate structural capacity limits. All other numbers indicate tipping limits. Actual numbers may vary due to differences in finished weight, wheelbase, etc.

Do not exceed parts of line rating.

Structural Load Chart Radius in Feet Boom Angle 22.8 Foot Boom Boom Angle 30 Foot Boom Boom Angle 36.8 Foot Boom 8 72 58,280*     10 67 49,690* 73 46,770*   12 61 43,680* 69 41,010* 74 39,130 15 51 37,430 62 34,770 69 32,950 18 39 32,610 55 30,400 64 28,680 20 29 29,610 50 28,110 60 26,480 25   34 23,430 50 22,340 30     37 19,210 35     18 15,780 36         0 12,890