Model 8470S
Available Optional Equipment

• 35-ton load block package with 8 parts of line max (in lieu of standard 25-ton block). Includes 15,000 lbs. SLP winch, 5/8" wire rope, and 35-ton quick reeve load block
• 5-ton auxiliary winch package, includes 12,000 lbs. SLP winch, 9/16" wire rope, headache ball, dual winch mount (with control valve for winch), rooster sheave, and additional upper sheave and anti-two block (this is a complete package)
• Foot operated boom extension (required when auxiliary winch is used with cab option)   
  
• 30 ft. basic four-chord lattice jib package with mounting and storage brackets  
  
• 30 ft. four-chord lattice jib package, offset able  to 0, 15, and 30 degrees, with plug in sheave tip assembly, mounting pins, and storage brackets (can be field converted with 16 ft. pullout to 46 ft. jib)
  
• 16 ft. pull out section and installation hardware; converts 30 ft. lattice to 46 ft. total reach jib
  
• Fully enclosed operators cab with hydraulic joysticks
  
• Diesel cab heater
  
• Cab controlled outriggers
  
• Free swing with foot brake
  
• Load on hook indicator with digital readout at operator console
  
• Load moment indicator with full digital display (transducer style)
  
• Floodlights, 12 VDC, mast mounted, manually adjusted
  
• Hydraulic oil tank heater; thermostatically controlled (2 elements)
  
• Hydraulic oil tank cooler; thermostatically controlled
• Two speed winch
• Pile driving circuit, including additional control valve (or diverter valve off of aux. winch) with lines stubbed off at base of mast.
• Decking, toolboxes, ladders, boom rest, etc.
• Special hydraulic oil (other than super ATF)