HOMEAbout UsNewsProductsContact Us
May  2010: QMC and Jensen Precast start fleet remounting project to meet CARB standards.
Long time customer Jensen Precast has decided the most efficient approach to meeting the strict emission standards now being enforced by the California Air Resources Board is  to remount their long lasting QMC cranes on new chassis.  This cost effective approach also allows us to complete a thorough inspection of the crane while it's on site.  Any maintenance or repairs can be performed during the remount process which completely avoids the downtime and cost associated with pulling a crane out the field.

April  2010: QMC delivers forward mount crane to Salt River Project of Phoenix AZ
The new 3450B unit offers dual stand-up stations and a lifting capacity of 25,000 pounds at 15' radius.

February 2010: QMC exhibits at 2010 World of Concrete in Las Vegas NV
Working hard delivering precast material to numerous exhibitors was a QMC rear mount currently owned and operated by Rockway Precast.  Inside, QMC received tremendous response at our booth to both our popular 4030R model and our new 10053R.   See January 2010 news below for a photo of this new model.

.
February 2010: QMC finalizes testing of Desert Sand Trailer Crane.

January 2010: Watco Rigging delivers QMC 10053R to Waters and Waters , Houston TX
The new 10053R is setting the standard for "brute cranes" in the oil field.  Equipped with a 3-piece 53' boom, it lifts 16 tons at 20' .  Permian Basin sales and support through Watco Inc. in Odessa TX.

October  2009: Watco Rigging delivers QMC 5555R to Waters and Waters , Houston TX
This new 5555R is equipped with a radio remote control which can allow the operator a better line of site with the payload.  Permian Basin sales and support through Watco Inc. in Odessa TX.

July  2009: World wide oil servicing company takes 153rd QMC crane
The 4255RS is the result of years of customer feedback resulting in a highly customized crane.  It's 3 piece proportional boom extends to 54.8' and can lift up to 45,000 pounds.  Note the custom built pipe racks mounted on the deck.

June  2009: QMC completes latest version of 6080TD Trailer Crane. 
Equipped with a deck mounted diesel, this crane operates using less fuel than if powered by a tractor's engine.  Designed with extreme reliability and low maintenance in mind,  this unit will provide years of service in the oil fields of Iraq where it will be used.          

April  2009: Long time customer takes delivery of their eleventh QMC crane. 

As proof of customer satisfaction, QMC proudly delivers our latest 4030R to one our most faithful customers in the precast concrete industry.  The QMC 4030R handles 40,000 lbs at 10 ft through a full 360 degrees of rotation and features our latest design 20ft rear outriggers.  This particular unit was equipped with a fully proportional radio remote control.

March 2009:  QMC 6082TD exported to Canada for oil field service work.
Featuring a 82 foot long 3-piece proportional boom with over 50,000 pound lift capacity in all quadrants, this unit will be used for extreme climate coil tubing work in Canada.   The crane is equipped with a Wylie quadrant-sensing LMI system, non-skid coated diamond plate deck and a tri-axle ABS-brake system.  QMC's exclusive design utilizes the torsion-box as the trailer's frame allowing for substantial overall weight savings.  The result is a larger payload capacity that yields more choices in rigging and payload transportation.  An optional diesel "Power Pack" is available and eliminates any dependency on a tractor to provide power to the crane.

 

March 2009:  QMC called upon for crane remount & complete refurbish.
After several costly attempts to have a local hydraulic shop properly repair and remount one of their older QMC cranes, a long time QMC customer in El Paso, Texas turned to QMC to have it   "done right".  The older 3630P crane received a complete test and inspection whereupon worn parts were replaced as needed.  The front stabilizers were replaced with our latest design out-and-down style outriggers.  Upon mounting the crane on a new Peterbuilt chassis, the unit was tested yielding a new “improved” load chart.  Being the original designer and manufacture, we are better equipped than anyone to properly remount and/or repair QMC cranes.  Please call us regarding this service at 714-754-0337.

February 2009:  QMC 3855C leaves for Potomoc River dredging project. 
Custom designed on a short wheelbase, this unit allows the operator to get into tight spots along the river's edge for dredging.  Built for all-weather use, crane operator sits in fully enclosed steel cab with both A/C and heater.  Joystick controls operate the crane.  QMC has built several river dredging units for previous customers.

 

Expert Service & Repair:
From routine maintenance to a complete refurbishing of your crane, QMC would like to remind you that we are here to meet your servicing needs, and have been for over 30 years. With cranes often outlasting the trucks they are mounted on, not only can we remount your existing crane onto a new chassis but we can also perform a complete crane refurbishment.  Call us to discuss your options for service and repair. 714-754-0337